Hard Drive Disk Status and Operations

Disk State Comments Message Type Message Displayed Operations State Icon

Responsive

OK

N/A

N/A

Remove Disk.

accept

Responsive and database disk almost full (between 80% and 90%)

The ASM disk volume has reached {0} % capacity.

Warning

Having insufficient free space available may cause system failure.

Reduce the purge audit window so that the audit is purged as soon as possible.

Make sure to back up your appliance.

Remove Disk.

partial

Responsive and system disk almost full (between 80% and 90%)

Single Mode—The system disk volume has reached {0} % capacity unexpectedly. Contact your product vendor.

Dual Mode—The system disk volume has reached {0} % capacity.

Warning

Having insufficient free space available may cause system failure.

Schedule archive audit to occur as soon as possible (this will push audit extracted data to ftp and free disk space)

Check Synchronization status

All cases—Make sure to back up your appliance.

Remove Disk.      

partial

Responsive and database almost full   (above 90%)

The database disk volume has reached {0} % capacity.

Error

Having insufficient free space available may cause system failure.

Reduce the purge audit window to minimum (7 days)

Remove Disk.

remove

Responsive and system almost full (above 90%)

Single Mode—The system disk volume has reached {0} % capacity unexpectedly. Contact your product vendor.

Dual Mode—The RAID disk volume has reached {0} % capacity.

Error

Having insufficient free space available may cause system failure.

Archive audit now (this will push now the audit extracted data to ftp and free disk space)

Check Synchronization status.

All cases—Make sure to back up your appliance.

Remove Disk.

remove

New disk inserted

Disk is present, but not configured

Error

Until you have replaced the disk and run the recovery process, another disk failure will cause system failure. Please replace this failed disk as soon as possible.

Recover; Remove Disk.

remove

Scheduled recovery(RAID)

Recovery scheduled <DATE TIME>

Warning

Until you have replaced the disk and run the recovery process, another disk failure will cause system failure.

Change Recovery Time.

partial

Recovering

<DISK NAME> is currently recovering

Warning

Until you have replaced the disk and run the recovery process, another disk failure will cause system failure.

N/A

partial

Recovery failed

Disk recovery failed. Try to recover the disk again, if the problem persists replace the disk, then schedule recovery.

Error

Until you have replaced the disk and run the recovery process, another disk failure will cause system failure. Please replace this failed disk as soon as possible.

Recover; Remove Disk.

remove

Not Working

The Disk is not responding.

Error

Until you have replaced the disk and run the recovery process, another disk failure will cause system failure. Please replace this failed disk as soon as possible.

Pull out the Disk and replace it as soon as possible.

remove

Note: "Remove Disk” is possible when the disk is not recovering or with a scheduled recovery, and only if the paired disk is responsive with the status OK, that is if the other disk with the same configuration (ASM or RAID1) is configured and working properly and with the status OK. It notifies the system that the disk will be removed. The system starts to be taken.