RESET CARD

Command Description

The RESET CARD command is used to:

• Clear the XAUTH 1 key

• Set the PIN value to the default PIN value

• Clear all PKI keys

• Clear all PIV Data containers

• Clear all OATH keys and OATH configuration in the case of the HID Crescendo Key

Instance: ACA

Access Condition: PIN or XAUTH1, see VERIFY PIN for PIN authentication and EXTERNAL AUTHENTICATION XAUTH key 1 for XAUTH authentication

After this command:

• All keys (XAUTH, PKI, OATH) will be cleared, as well as all PIV Data containers.
• The card or the device will be in the manufacturing state. The PIN object is reset to “00000000” (that is, 30h30h30h30h30h30h30h30h).

Command Message

The following table lists the coding for the RESET CARD command message.

CLA	00h
INS	38h
P1	00h
P2	00h
Lc	Empty
Data Field	Empty
Le	Empty

Response Message

Data Field Returned in the Response Message

The response message is always empty.

Processing State Returned in the Response Message

The following table lists the processing state returned in the response message.

Status	Meaning
6982h	Access condition not satisfied: the PIN or the XAUTH 1 key has not been authenticated
9000h	Successful Execution