Installing DigitalPersona LDS Workstation

DigitalPersona Workstation will generally be installed remotely using the Install DigitalPersona Workstation Remotely procedure. However, to illustrate the complete installation steps, the local installation is described first.

Prerequisites

• Before installing the DigitalPersona Workstation on a computer, make sure it meets the system requirements and prerequisites, and that you have Administrative Rights on the computer.

• DigitalPersona LDS Servers will be used for authentication and should be installed and configured before installing the DigitalPersona Workstation.

Deployment Considerations

If your environment includes more than one installation of DigitalPersona LDS Server, and if those servers are not part of the same AD LDS configuration set, then your DigitalPersona LDS Workstations should be part of an OU where you can create a GPO defining the specific AD LDS instance name where the DigitalPersona LDS Server is hosted.

See the AD LDS instance name setting.

Upgrading from Previous Versions

Detailed information about upgrading and migrating existing deployments is available in the Upgrade Notes provided in the Documentation folder of the DigitalPersona LDS package.

Compatibility

This version of DigitalPersona Workstation is compatible with the following DigitalPersona products:

• DigitalPersona Access Management API (Previously Altus Auth SDK)

• DigitalPersona Web Components (Previously Altus Confirm SDK)

• DigitalPersona Server* Client On Server (COS) - Only the AD Workstation is designed to be installed on a domain controller. The LDS Workstation is not designed with this capability, and will not work on a domain controller due to the fact that all domain users will become local users if you run the software on the domain controller

Install DigitalPersona Workstation Locally

1. Launch the installer from the DigitalPersona Workstation folder of the product package.

2. Run Setup.exe from the DigitalPersona LDS Workstation folder of the product package.

   Or, for silent mode, enter setup.exe /s /v” /qn” at the command line.

3. When the Welcome page displays, click Next to proceed with the installation.

   

4. Read the License Agreement page. If you agree, select the I accept the terms in the license agreement button and click Next.

   

5. On the next page, you can specify the folder that DigitalPersona Workstation will be installed in. If you want to install it to the default location, click Next.

   Otherwise, click Change to specify a new location and then click Next to continue.

   

6. On the Choose Where Biometric Data Are Stored page, select whether to store biometric data locally or remotely. Storing data remotely allows biometric credentials to roam, i.e. be used on multiple computers.

   Biometric data for fingerprints can either be securely stored remotely in a central database within your organization or locally on this computer. Only choose local storage if your organization prohibits centralized storage of biometric data, or when supporting secure or small form factor fingerprint readers.

   Important: This selection cannot be changed later without uninstalling and reinstalling this software. Changing local storage to remote storage will also remove any biometric data and Password Manager logon data that has been stored on this computer.

   

7. On the Setup Type page, choose from among the following options to indicate the type of installation you want to perform and what program features you want to install.

   

   • Typical - Installs the most commonly used features.

     • DigitalPersona Logon for Windows: In this product, Password Manager is not part of the Typical Setup Type, but can be selected by choosing the Custom Setup Type.

     • DigitalPersona Premium: In this product, Password Manager is included as part of the Typical Setup-type, but can be deselected by choosing the Custom Setup Type.

   • Custom - Allows selection of which features to install.

     • One Touch Logon - Enables users to log on with fingerprints and other approved credentials.

     • Password Manager - Enables users to configure their fingerprint logons to websites and Windows programs.

       • Password Manager Admin Tool - By default, this item is not installed.

         When upgrading your DigitalPersona Workstation, if a previous version of the Password Manager Admin Tool is installed on the computer, the installation wizard will ask that you first uninstall the previous version before installing the new version included with this software.

     • Attended Enrollment - Enables designated users to supervise credential enrollment.

       Note: Attended Enrollment is not installed by default, but must be specifically selected as part of a Custom installation.

8. Click Next and then Install, to begin installation.

   

9. When installation is complete, a final page displays. Click Finish.

   

10. When prompted to do so, click Yes to reboot the computer, or No if you plan to restart the computer later.

    

After the computer restarts, and at every subsequent restart, the DigitalPersona client software automatically uses the default DNS Server to locate all DigitalPersona Servers for the domain and its site:

• If more than one DigitalPersona Server is found, the Workstation will choose the DigitalPersona Server for authentication that offers the most efficient connectivity.

• If no DigitalPersona Servers are found, the client will perform authentication locally.

For a description of the features and functions, see Using DigitalPersona Workstation.

Install DigitalPersona Workstation Remotely

The installer for DigitalPersona Workstation uses Microsoft Windows Installer (MSI) technology, which allows administrators to remotely install or uninstall the software using Active Directory administration tools, or other software deployment tools.

1. For mixed 32- and 64-bit environments, copy the entire contents of the DigitalPersona Workstation x86|x64 folder to a network share.

2. Create an OU (Organizational Unit) that will be used to distribute the software package.

3. Install any prerequisites (see System Requirements) on the target computers.

4. Assign the package:

   1. Start the Group Policy Management snap-in from the Windows Server Manager, Tools menu, selecting Group Policy Management.

   2. In the Group Policy Management tree, right-click the OU created in step 2 above and from the context menu, choose Create a GPO in this domain, and Link it here. Name the new GPO, then right-click it and choose Edit. This will launch the Group Policy Management Editor.

   3. In the Group Policy Management Editor, open Computer Configuration, Policies, Software Settings, Software installation.

   4. Right-click Software installation and select New, Package from the context menu.

   5. In the Open dialog box, type the full Universal Naming Convention (UNC) path of the shared installer package that you want. For example, \\file server\share\file name.msi.

      Important: Do NOT use the Browse button to access the location. Make sure that you use the UNC path of the shared installer package.

   6. Click Open.

   7. In the Deploy Software dialog, click Assigned, and then click OK.

      The package is created and listed in the right panel of the Group Policy Management Editor window.

   8. (Optional) To add Password Manager to the installation package:

      1. Right-click the package and select Properties.

      2. Select the Modifications tab.

      3. Click the Add button.

      4. Browse to the DigitalPersona Workstation software source package.

      5. Select PM.mst.

      6. Click OK.

   9. For 32-bit installation packages only:

      1. Right-click the package and select Properties.

      2. On the Deployment tab, click Advanced.

      3. Deselect the checkbox Make this 32-bit X86 application available on Win64 machines.

         Note: If this checkbox remains selected, the application will not install.

5. Installation will begin on each client during the first reboot after the computer obtains the deployment policy (that is, during the next scheduled AD policy refresh or as a result of running GPUPDATE\FORCE on the local computer).

Install DigitalPersona Workstation Patches Remotely

The installer for DigitalPersona Workstation uses Microsoft Windows Installer (MSI) technology, which allows administrators to remotely install patches to software using Active Directory administration tools, or other software deployment tools, through slipstreaming.

1. Update the installation package by opening a command prompt session and type the following command to patch the previously created installation package:

   Copy

   msiexec.exe /a [path\name of original MSI file]
   msiexec.exe /p [path\name of updated MSP file]\ /a [path\name of administrative installation file]

2. Redeploy the application:

   1. Start the Group Policy Management snap-in - from the Windows Server Manager Tools menu, select Group Policy Management.

   2. Right-click the GPO that governs the computers you want to update and select Edit. This will launch the Group Policy Management Editor.

   3. In the Group Policy Management Editor, navigate to Computer Configuration/Policies/Software Settings/Software Installation.

   4. Right-click the previously deployed DigitalPersona client software package and select All Tasks\Redeploy application. Confirm your intent to redeploy the application.

3. Installation will begin on each client during the first reboot after the computer obtains the deployment policy (that is, during the next scheduled AD policy refresh or as a result of running GPUPDATE\FORCE on the local computer).

Install DigitalPersona Workstation using the Command Line

DigitalPersona Workstation can also be installed or uninstalled using MSI at the command line.

The syntax of the msiexec command is shown below and is followed by a description of the command line options, parameters and values available:

msiexec /i setup.msi [INSTALLDIR=”<directory>”] [ADDLOCAL=<software>] [BIOMETRICDATA=<location>] [REMOVE=<software>] [TRANSFORMS=<list of transform files>] [/qn] [other MSIEXEC options]

Command Line Options

Parameters

The following parameters can indicate where the software should be installed on the computer and what components should be included or removed.

ADDLOCAL and REMOVE Values

The table below lists the values that may be provided with the ADDLOCAL and REMOVE parameters and provides a description of each value:

Following are a few rules when using these parameters and their values:

• If ADDLOCAL or REMOVE are not specified, msiexec will install the default (Typical) DigitalPersona Workstation features. The Typical features do not include Password Manager or Attended Enrollment.

• Individual software features cannot be installed unless the All value was used with the ADDLOCAL parameter first.

• To install DigitalPersona Workstation software for the first time while omitting one or more software features, use ADDLOCAL=ALL, followed by the REMOVE parameter with each software component you do not want to install separated by a comma.

  For example:

  Copy

  msiexec /i setup.msi    ADDLOCAL=ALL REMOVE=Logon

About Transform files

DigitalPersona uses Transform (.mst) files to create an installation package for DigitalPersona components in the supported languages listed below. These files are located in the Bin directory of your product package.

When creating a package for a GPO install, select the Advanced option and then add the transform file from the Modifications tab. Ensure that the transform file is included in a folder that is shareable by the Active Directory server computer and all target client computers.

Uninstall DigitalPersona Workstation

You can remove DigitalPersona Workstation using the Add or Remove Programs option in the Control Panel or through MSI.

In the Control Panel, the Workstation software is listed as DigitalPersona LDS Workstation.

You must have local administrative privileges to modify or uninstall DigitalPersona Workstation.